Cabinets · Nashville, TN
Cabinets in Columbia, TN
Columbia cabinet makers for custom cabinetry, semi-custom & stock cabinets, cabinet refacing and more. Cabinets measured in person, installed level and scribed to the wall, priced by the box in writing, across Maury County and the rest of Middle Tennessee.
Estimate request
Tell us about the job.
Straight to us, and a reply the same day.
What Columbia’s houses mean for cabinetry
Pre-war kitchens have plaster walls, tall ceilings and floors that slope, and cabinets in one are scribed and shimmed by a craftsman; a stock run from a store never fits.
Older houses want cabinets that look like they belong — inset doors, painted finishes, proportions from the period — and semi-custom lines that offer that are the value choice.
The house’s construction — plaster walls, out-of-square rooms, a soffit over the uppers — sets the installation, and the drawing is made from the actual room.
Newer houses have builder-grade boxes on a decent layout, and refacing or new doors on the existing boxes often gives the kitchen the upgrade at half the price of new.
The ground affects cabinets only through the floor — a slab that is not level, a crawl that moves the floor with the seasons — and the installer checks the floor before the base cabinets go in.
Columbia at a glance
What we work on here.
Housing stock
Significant pre-1940 stock plus recent growth
County
Maury County
Ground conditions
Rolling clay; shallow or stone foundations under the old houses
Permits issued by
City of Columbia Building and Codes
In and around Columbia:
- Downtown Columbia
- Northfield
- Graymere
- Riverside
- Hampshire area
Services
Cabinets services in Columbia.
Custom Cabinetry
Built to your dimensions and your storage, in the wood, finish and door style you choose. Fits walls that are not square.
Learn moreSemi-Custom & Stock Cabinets
Quality manufactured lines specified and installed properly, where a full custom build is more than the room needs.
Learn moreCabinet Refacing
New doors, drawer fronts and veneer on boxes that are structurally sound. A fraction of replacement and a full visual change.
Learn moreCabinet Refinishing & Painting
Degreased, sanded, primed and sprayed with a proper cabinet coating rather than brushed with wall paint.
Learn moreBuilt-Ins & Bookcases
Window seats, media walls, mudroom lockers and bookcases that look original to the house.
Learn moreHardware & Interior Storage
Soft-close hardware, pull-outs, drawer organizers and pantry systems retrofitted into cabinets you are keeping.
Learn moreWhy homeowners here call
What brings us to Columbia.
Builder-grade cabinet boxes in Middle Tennessee homes from the 1990s and 2000s are frequently better made than what would replace them at the same price — solid plywood or thick particleboard carcasses with real face frames, in oak or maple that has simply gone out of fashion. Refinishing or refacing those is often the honest recommendation, and it is a legitimate answer rather than a compromise.
- Wanting built-ins that look original to the house
- Replacing cabinetry after a leak or water damage
- Cabinets dated in appearance but structurally sound
- Doors sagging, delaminating or no longer closing square
Hanging boxes without finding studs and shimming. Cabinets loaded with dishes are heavy, and a run that was not shimmed level shows in every door gap.
Nearby
Also serving these towns.
Behind Closed Doors
Cabinets advice for Columbia homeowners.
September 28, 2026
Upper Cabinets Pulling Away From the Wall
A dark line along the top of a wall cabinet, wider at the top than the bottom, means the cabinet is leaning off its screws. Empty it before anything else.
Read itSeptember 21, 2026
Cabinet Doors That Sag, Rub or Will Not Close
Most cabinet door complaints are fixed with a screwdriver and two minutes per hinge. The trick is knowing which screw moves the door which way.
Read itSeptember 14, 2026
Painted or Stained Cabinets, and Which Lasts
The finish is the first thing you see and the first thing to show its age. Paint and stain wear differently, and the difference is worth knowing before you choose.
Read itFAQ
Cabinets in Columbia — questions
Do you cover Columbia, TN?
Yes. Our cabinet makers and installers work Columbia and across Maury County, with Spring Hill, Franklin, Brentwood, Nashville inside the same range.
How much does cabinetry cost in Columbia?
Cabinets in Columbia are priced by the linear foot or the box, and the tier — stock, semi-custom, custom — moves the number three to one; the installation, the removal of the old cabinets and the countertop are separate lines the quote should show. Older houses want cabinets that look like they belong — inset doors, painted finishes, proportions from the period — and semi-custom lines that offer that are the value choice.
Who issues permits for cabinetry in Columbia?
Cabinet replacement needs no permit from City of Columbia Building and Codes; a remodel that moves the sink or the range does, and the contractor doing that part will pull it.
How quickly can you get to Columbia?
A measure in Columbia is usually within a week or two; custom cabinets take weeks to build, semi-custom weeks to ship, and the installation is a few days once they land.
What areas around Columbia do you serve?
Cabinet makers and installers serving Columbia also cover Spring Hill, Franklin, Brentwood, Nashville; the range runs to 65 towns in 12 counties.
Free estimate
Need a cabinet maker in Columbia?
Tell Nashville's Cabinets what is going on and we will come back with a free written estimate for the job in Columbia.