Cabinets · Nashville, TN
Cabinets in Nashville, TN
Nashville cabinet makers for custom cabinetry, semi-custom & stock cabinets, cabinet refacing and more. Cabinets measured in person, installed level and scribed to the wall, priced by the box in writing, across Davidson County and the rest of Middle Tennessee.
Estimate request
Tell us about the job.
Straight to us, and a reply the same day.
What Nashville’s houses mean for cabinetry
Pre-war kitchens have plaster walls, tall ceilings and floors that slope, and cabinets in one are scribed and shimmed by a craftsman; a stock run from a store never fits.
Mid-century kitchens have the original site-built cabinets, often worth refinishing rather than replacing, and a maker who can match them for an addition is the right hire.
In a fast-built town the kitchens are the builder’s standard box on the builder’s standard plan, and refacing or new doors on sound boxes is the common upgrade.
The house’s construction — plaster walls, out-of-square rooms, a soffit over the uppers — sets the installation, and the drawing is made from the actual room.
The ground affects cabinets only through the floor — a slab that is not level, a crawl that moves the floor with the seasons — and the installer checks the floor before the base cabinets go in.
Nashville at a glance
What we work on here.
Housing stock
Pre-1940 through brand new
County
Davidson County
Ground conditions
Limestone near the surface, clay above it, vented crawl spaces
Permits issued by
Metro Nashville Codes and Building Safety
In and around Nashville:
- East Nashville
- Green Hills
- Germantown
- The Nations
- Sylvan Park
- Donelson
- Bellevue
- Hermitage
Services
Cabinets services in Nashville.
Custom Cabinetry
Built to your dimensions and your storage, in the wood, finish and door style you choose. Fits walls that are not square.
Learn moreSemi-Custom & Stock Cabinets
Quality manufactured lines specified and installed properly, where a full custom build is more than the room needs.
Learn moreCabinet Refacing
New doors, drawer fronts and veneer on boxes that are structurally sound. A fraction of replacement and a full visual change.
Learn moreCabinet Refinishing & Painting
Degreased, sanded, primed and sprayed with a proper cabinet coating rather than brushed with wall paint.
Learn moreBuilt-Ins & Bookcases
Window seats, media walls, mudroom lockers and bookcases that look original to the house.
Learn moreHardware & Interior Storage
Soft-close hardware, pull-outs, drawer organizers and pantry systems retrofitted into cabinets you are keeping.
Learn moreWhy homeowners here call
What brings us to Nashville.
Builder-grade cabinet boxes in Middle Tennessee homes from the 1990s and 2000s are frequently better made than what would replace them at the same price — solid plywood or thick particleboard carcasses with real face frames, in oak or maple that has simply gone out of fashion. Refinishing or refacing those is often the honest recommendation, and it is a legitimate answer rather than a compromise.
- Cabinets dated in appearance but structurally sound
- Doors sagging, delaminating or no longer closing square
- A corner or an awkward wall where nothing standard fits
- Not enough storage for the space the room actually has
Painting cabinets without degreasing. Kitchen doors carry years of invisible cooking residue, and no coating will bond through it.
Nearby
Also serving these towns.
Behind Closed Doors
Cabinets advice for Nashville homeowners.
September 28, 2026
Upper Cabinets Pulling Away From the Wall
A dark line along the top of a wall cabinet, wider at the top than the bottom, means the cabinet is leaning off its screws. Empty it before anything else.
Read itSeptember 21, 2026
Cabinet Doors That Sag, Rub or Will Not Close
Most cabinet door complaints are fixed with a screwdriver and two minutes per hinge. The trick is knowing which screw moves the door which way.
Read itSeptember 14, 2026
Painted or Stained Cabinets, and Which Lasts
The finish is the first thing you see and the first thing to show its age. Paint and stain wear differently, and the difference is worth knowing before you choose.
Read itFAQ
Cabinets in Nashville — questions
Do you cover Nashville, TN?
Yes. Our cabinet makers and installers work Nashville and across Davidson County, with Brentwood, Hendersonville, Franklin, Mt. Juliet inside the same range.
How much does cabinetry cost in Nashville?
Cabinets in Nashville are priced by the linear foot or the box, and the tier — stock, semi-custom, custom — moves the number three to one; the installation, the removal of the old cabinets and the countertop are separate lines the quote should show. Mid-century kitchens have the original site-built cabinets, often worth refinishing rather than replacing, and a maker who can match them for an addition is the right hire.
Who issues permits for cabinetry in Nashville?
Cabinet replacement needs no permit from Metro Nashville Codes and Building Safety; a remodel that moves the sink or the range does, and the contractor doing that part will pull it.
How quickly can you get to Nashville?
A measure in Nashville is usually within a week or two; custom cabinets take weeks to build, semi-custom weeks to ship, and the installation is a few days once they land.
What areas around Nashville do you serve?
Cabinet makers and installers serving Nashville also cover Brentwood, Hendersonville, Franklin, Mt. Juliet; the range runs to 65 towns in 12 counties.
Free estimate
Need a cabinet maker in Nashville?
Tell Nashville's Cabinets what is going on and we will come back with a free written estimate for the job in Nashville.